l | @r @l|k @o @l
|Specification will be changed for improvement without notice.|
|1j Unusual deformation of lens dish is prevented with inclining lower
@@lens dish axis to front at any selected angle between 0 and 30to
@@el-minate dead angle for polishing radius surface and reversing rotation
@@between upper and lower spindles and also oscillating upper lens dish
@@spindle.@Stable polishing can be obtained with preventing pellet flaw
@@caused by stopping spindle on account of sophisticate designe.
2j The machine with sticking multi-lens pellets is high efficient to polish
@@deep dish work under 120 mm. diameter with lens diameter between 10 and
@@80 mm.@Polishing time can be shorten marvelously to compared to
3j Tommy-bar shall be select-d either for spherical or plain surface as
@@upper spindle is turned reversely against lower spindle compulsorily.
@@Stocked lens dish can be used.
4j Functions are controlled by eash spindle.
5j Work pressure is controlled by air and spindle is moved to up and sown
@@by foot pedal on eash spindle.@Polishing time is set by timer. Work
@@is pressurized by pushing start button and released by finishing work
6j Abrasive liquid precipitation tank with casters is easy to handle.
7j Oblique type to incline lower lens dish axis between 30and 60is
@@available on request as option.